73 D18 roof replacement

Started by demon, March 16, 2017, 08:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


By the late 80's Winnebago had started curving the roof, for good reason. It's not just stronger, but it works to shed water or other particles the sky likes to deposit. If it starts to sag a little over the years, it still won't puddle water.



borrowed my cousins tent to park it under while i replace the roof


Well started pulling the roof off my Winni and figured I would post some pics of what I did. I looked at the few others that have done this and posted pics and pretty much will do it similar. One thing i dont want is a big curve to the roof. I will give it some curve but maybe closer to 1 inch higher in the middle. I want it to look the way it did. I am hoping to find a place that i can get rolled sheet aluminum to skin the roof when its done. I read someone said they did that but still havent found a place to get it local . I build custom cars and trucks...mainly fabricating so this will end up being a show/ camper/ tow rig .