Need some help -Shocks for 1972 Winnebago Indian with 413 motor/dodge chassis

Started by nancywieck, May 27, 2020, 10:34 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

nancywieck

Looking for some recommendations on shocks for our 1972 Winnebago.



LJ-TJ


nancywieck

Thank you so much for the information. This will help us. We are first time RV owners. We just love our Vintage Winnebago.

Rickf1985

Bilstiens are probably the most expensive of the brands you can get but they are worth every penny when it comes to controlling the roll and sway of these tuna boats. When you get the shocks also look at the condition of the sway bar bushings and replace them if they are bad.

Oz

I put Bilstiens on mine.
Excellent!  Expensive!
Likely would have noticed no difference if I'd have bought Monroe.

1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca

Grog

Rick is right check the sway bar bushings,  if they are rubber replace them with polyurethane bushings.   I did that on my '76 C22 and it made a big improvement driving down the road.

FarPoint

PO had replaced mine with one size too large. Replaced with the correct sway bar bushings, Huge difference. Quieter too.
Of all the things I've lost
I miss my mind, the most...

nancywieck

First thanks to everyone for the information.  As you can see I am new at this and once my question was moved to the right location, you all were able to give me good advice.  We will continue this journey with our Winnebago Miss Adventure.