Dodge 318 in 73 Brave missing a part?

Started by Frank M, August 15, 2011, 10:17 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Frank M

I have a Dodge 318 in my 73 D20 Brave and it looks like a part was removed from the engine. The only thing that remains is a mounting plate and a pulley above the water pump. I rebuilt a few Dodge motors in the past so I know my way around them. I had a 70 Challenger in my younger years. The only thing I can think of is that there was some type of pump on this plate at one time. Maybe for the hot water heater? Anybody know? Not important but it just has me curious. Thanks

brians69d24


jkilbert

i have a mounting plate on top of my 440 for the ac....if i had it.
Greetings from the steel buckle of the rust belt

LJ-TJ


JDxeper

Could it have been part of the pollution control equipment?
Tumble Bug "Rollin in MO" (JD)

DaveVA78Chieftain

[move][/move]


Frank M

I have photos but I can not figure out how to add them to the post

.

Oz

Post them in an album and use the image id link or post them on a free, web photo storage site like webshots, esnips, etc and use the bbc imbed code from it
1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca

RedneckExpress

Do your in-dash heater controls have an A/C option?  Now, I don't know for certain if it's held true for all the years of the 318 and 360, but usually that top dead center bracket spot was for the A/C pump if the vehicle had the option. 
Follow along with me as I full-time the Redneck Way in [url=http://