Location Of Brake Master Cylinder On A '89 27'Chieftain P30 Chassis

Started by John, May 19, 2021, 07:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

John

I have a spongy brake pedal and probably need to bleed the brakes. Is there already information on here somewhere on how to do the job? I can't get the search function to give me info.

Eyez Open

Go to search enter your question then use the drop bar to google it. One of the most intuitive functions ive seen on a forum..results below.

https://www.google.com/search?q=bleeding+brakes+p30&sitesearch=www.classicwinnebagos.com

tarifachris

Quote from: John on May 19, 2021, 07:59 PM
I have a spongy brake pedal and probably need to bleed the brakes. Is there already information on here somewhere on how to do the job? I can't get the search function to give me info.



Be prepared to replace all rubber brake lines, brake fluid and master brake cylinder...
I replaced as well the hydroboost and the power steering pump which powers your brake system. After I removed the old brake fluid I flushed and replaced it with new one... I used speed bleeder and a vacuum hand pump to bleed the system. I had to remove my rear dually wheels to have access to the bleeding nipples. I replaced as well all brake pads...

You can see pictures here from last year when I did it:
https://www.classicwinnebagos.com/forum/index.php?topic=15398.msg96253#msg96253