Started by DaveVA78Chieftain, February 20, 2011, 10:54 PM
0 Members and 4 Guests are viewing this topic.
Quote from: Froggy1936 on September 20, 2011, 10:17 PMGulf coast if you are still in need of an old Progessive I replaced mine with a newer one also (the old one was still working) Let me know Frank
QuoteDave, my old panel is perfect, but can the intel-icharger be added to my old panel?
QuoteShould I mess with panel/ It ain't broke!
QuoteNew deep cycle 80 ah
QuotePO cut 30 amp shore power cord and spliced heavy extension cord in..How does this affect system?
Quote from: DaveVA78Chieftain on August 19, 2013, 04:31 PMNot so much losing; rather your limited to 15amps. As long as you do not try to run an AC you should be ok. As far north as you are, if you are wintering in place, make sure you have skirts on the outside to block wind from getting under rig...Dave
Quote from: DaveVA78Chieftain on August 18, 2013, 02:34 PMQuoteDave, my old panel is perfect, but can the intel-icharger be added to my old panel?Are you asking can the converter section of your original integrated PD power panel be modified to use one of the newer converters? If so, then the answer is yes but you have to understand what you are doing. The only portions you would retain are the AC CB's and DC Fuse panel. You would have to rewire everything. How much rework depends on the model of PD power panel you are starting with. There about a dozen or so variations (http://dave78chieftain.zxq.net/ConverterInfo.html#1970PD)."What happened to you zxq.net site? It's gone when you click the link!!!Dave