Photos of Roof Repair & Replacement

Started by The_Handier_Man1, November 11, 2008, 08:32 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RockwoodMike

Well..I have been working on this all day and I am having one  $@!#@! of a time..I kinda wish I had not put so much taper to it..Going from a taper to flat with plywood is not going easy..

I am going to cut grooves on the back side of the plywood to make it flexible to create the transition..

Think this through..I think I have made a mess..maybe you shouldn't be listening to all this..I may have screwed up in a big way :-[ 
The best mechanic is the one that can make it run with the least amount of parts!

78chief

Quote from: RockwoodMike on April 11, 2024, 05:52 PMWell..I have been working on this all day and I am having one  $@!#@! of a time..I kinda wish I had not put so much taper to it..Going from a taper to flat with plywood is not going easy..

I am going to cut grooves on the back side of the plywood to make it flexible to create the transition..

Think this through..I think I have made a mess..maybe you shouldn't be listening to all this..I may have screwed up in a big way :-[ 

Sorry to hear your having trouble. I would think you would need to have the flat, but round out from there.  the sharp corner transition from the flat to the taper is probably the issue.

RockwoodMike

https://www.classicwinnebagos.com/forum/index.php?topic=15119.new#new

Take a look at this posting I just did..Last page..number 621

I think this will work..
The best mechanic is the one that can make it run with the least amount of parts!

78chief

Quote from: RockwoodMike on April 11, 2024, 10:56 PMhttps://www.classicwinnebagos.com/forum/index.php?topic=15119.new#new

Take a look at this posting I just did..Last page..number 621

I think this will work..

Funny I found and was just reading your build thread when you post this. Keep up the good work