72 c-20 rims

[The_Handier_Man1]

From: 67imp  (Original Message)
Sent: 6/11/2008 11:51 AM

I have decided to go with a 72 c-20 .
I cannot find squat on the chassis information . I assume it is on a p30 chassis.
does anyone know if these are 1 piece rims or not?

Any other information on this chassis would buy someone a beer or two

Lumpy



From: denisondc
Sent: 6/11/2008 12:31 PM

As far as I recall, it could have been either type; the split rims or one piece wheels. The one piece wheels would probably be a larger diameter, such as 17" or 17.5", in place of 16", so the 'dropped center' of the rim would be able to clear the brake drums in back.



From: bluebird5750
Sent: 6/19/2008 9:26 PM

My 80 Itasca had 16" one piece wheels on it. But they were for tube type tires. They do make valve stems to convert thos wheels to tubeless. I had mine done a couple of years ago.

Chuck