Author Topic: Hydraulic brake hoses swap m300  (Read 102 times)

0 Members and 1 Guest are viewing this topic.

Offline Daenrico41

  • New Poster
  • **
  • Posts: 14
  • I own a: Winnebago
  • Year: 1975
  • Model: Brave 21
  • Chassis: Dodge m300
  • Engine: 440-3
Hydraulic brake hoses swap m300
« on: November 24, 2021, 11:42 AM »
Hi,
 Im looking everywhere for hours and find nothing for my front m300 Winnebago 1974 with 1piston caliper,
I've see than the b100 1974 hoses are like the same and its the same caliper,
Do any of you have find some replacement hoses for it ?
Alretta have only one in stock and ask 200 us for it.

Offline Elandan2

  • 20 Year Member
  • Top Post Contributor
  • *
  • Posts: 545
  • Member since: 2001
  • I own a: Winnebago
  • Year: 1977
  • Model: Elandan II D27DRK
  • Chassis: Dodge M500
  • Engine: 440
Re: Hydraulic brake hoses swap m300
« Reply #1 on: November 24, 2021, 03:17 PM »
Have you tried RockAuto?
Rick and Tracy Ellerbeck

Offline Daenrico41

  • New Poster
  • **
  • Posts: 14
  • I own a: Winnebago
  • Year: 1975
  • Model: Brave 21
  • Chassis: Dodge m300
  • Engine: 440-3
Re: Hydraulic brake hoses swap m300
« Reply #2 on: November 24, 2021, 05:37 PM »
Nothing on napa , nothing dealer ,nothing on ebay or amazon , just have order some d300 1974 caliper and hoses to see fit it fit , i keep you updated .. the caliper are the same number than my 1974 m300 so the hoses should fit ..

Online Eyez Open

  • Post Contributor
  • ***
  • Posts: 89
  • Member since: 2020
  • I own a: a Motor Home
  • Year: 1983
  • Model: Imperial 33
  • Chassis: P30
  • Engine: 454
Re: Hydraulic brake hoses swap m300
« Reply #3 on: November 24, 2021, 08:28 PM »
I do believe you may very well be able to cross over your parts search and find the p300 shares much of the same components Below is a link to a P300 check and verify.

https://www.carid.com/1974-dodge-p300-brake-parts/

And Doorman.

https://www.dormanproducts.com/gsearch.aspx?year=1974&make=Dodge&model=M300&origin=YMM&parttype=Brake%2520Hose

Offline DaveVA78Chieftain

  • 16 year member
  • Top Post Contributor
  • *
  • Posts: 3590
  • Member since: 2003
  • I own a: I don't own one but I'm a vintage RV enthusiast!
  • Year: 1978
  • Model: Chieftain
  • Chassis: Dodge M400
  • Engine: 440-3
Re: Hydraulic brake hoses swap m300
« Reply #4 on: November 24, 2021, 10:05 PM »


The only hoses I have seen for a 1974 M300 application only have those blocks on one end not both.

The ones I see for front are like this one pictured below (Ebay Link to Centric P/N 150.67303
).  EVen the parts manual reflects that the metal brake line screws into a non-block fitting at the frame.







Please note that the Dodge P300 chassis used drum not disk brakes.

Offline Daenrico41

  • New Poster
  • **
  • Posts: 14
  • I own a: Winnebago
  • Year: 1975
  • Model: Brave 21
  • Chassis: Dodge m300
  • Engine: 440-3
Re: Hydraulic brake hoses swap m300
« Reply #5 on: November 25, 2021, 10:22 AM »
Tanks Dave ,
my picture show the 2 end hoses , who enter in the calipers with the banjo 3/8 bolts .. the other side are normal hose end with double flares.
I have order the calipers of a b100 and the hoses .. so the hoses gonna fit in the calipers for sure .
The numbers on the calipers are almost the same .
 i need to adapt Becose anyway the hoses are discontinued everywhere ..
working on this project is a big puzzle.
Time gonna tell if it fit.  i??