Hot water bypass stopped working

Started by skloon, October 15, 2021, 01:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

skloon

So went to winterize on the weekend and turned the valve on my 92 Sunflyer- it was still letting water into the tank so I pulled the valve and it did shut off- there is such a spaghetti pile of plumbing I cannot figure it out- can these valves go bad ? it is a ball type one

Oz

Ball valves normally work very well for a long time.  However, a particle of foreign matter can interfere with its operation. It may be only that. 

Hm?
1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca

Elandan2

If your bypass has only one ball valve, it could be the check valve on the other end of the bypass hose that is not closing properly.
Rick and Tracy Ellerbeck