Author Topic: Rub rail early 70's winnebago  (Read 102 times)

0 Members and 1 Guest are viewing this topic.

Offline Finespine

  • Test Driver
  • *
  • Posts: 3
  • Member since: 2021
  • I own: a Motor Home
  • Year: 1972
  • Make: Starcraft
  • Model: Starcruiser
  • Chassis: Dodge
  • Engine: 413
Rub rail early 70's winnebago
« on: May 23, 2021, 11:04 PM »
Hello to all the knowledgeable RVer's. I could use you help. Ever since I have seen the winnebago truck idea I can't get it out of my head. I can get a winnebago cheap do to the roof leaking and I have done some research on reskinning the exterior but was wondering if there is any place repoping the rub rails? Or what is out there that is similar.

Offline Oz

  • Top Post Contributor
  • *
  • Posts: 3760
  • Member since: 2002
  • I own: a Motor Home
  • Year: 1974
  • Make: Winnebago
  • Model: D24 Indian
  • Chassis: Dodge
  • Engine: 440-3
Re: Rub rail early 70's winnebago
« Reply #1 on: May 24, 2021, 01:24 AM »
Rub rails?  Do you mean the side molding?  If so, no, there's no place that makes them the same.  You can use what you can get from salvage/part outs, or buy wide, aftermarket replacement.  Note that the mouding covers the seams between the upper body and lower skirting sections.

Offline Finespine

  • Test Driver
  • *
  • Posts: 3
  • Member since: 2021
  • I own: a Motor Home
  • Year: 1972
  • Make: Starcraft
  • Model: Starcruiser
  • Chassis: Dodge
  • Engine: 413
Re: Rub rail early 70's winnebago
« Reply #2 on: May 24, 2021, 01:29 PM »
Yes that is what I'm looking, for the mounding that's between the sid skirt and mid body siding. Thanks for confirming my suspicions Oz, I was thinking it wasn't being remanufactured as I couldn't find it anywhere. Anybody know of anything close to the original stuff out there?

Offline RANGERRICK

  • Post Contributor
  • *
  • Posts: 108
  • Member since: 2015
  • I own: a travel trailer
  • Year: 1996
  • Make: Jayco
  • Model: 31BHS
Re: Rub rail early 70's winnebago
« Reply #3 on: June 11, 2021, 02:15 PM »
Do you have a pic and how many feet do you need?
Bill