Author Topic: 1975 Winnebago 17.5" wheel covers / Hubcaps  (Read 319 times)

0 Members and 1 Guest are viewing this topic.

Offline shrike

  • New Poster
  • **
  • Posts: 8
  • Member since: 2020
  • I own: a Motor Home
  • Year: 1975
  • Make: Winnebago
  • Model: Brave, D19
  • Chassis: Dodge M300
  • Engine: 318
1975 Winnebago 17.5" wheel covers / Hubcaps
« on: November 19, 2020, 01:09 PM »
Hello,  I'm looking for brackets and center nuts to use the original hubcaps on my 1975 Winne Brave with 17.5" wheels.  I have 2 of what I believe are the correct brackets and center nuts for the rear but I am missing the brackets and nuts for the front.  I'm sure the nuts are the same but unsure of the bracketry.  Anyone out there with info or the brackets themselves, I would appreciate any help.  Attached is a photo of the hubcaps in question.
funny
0
informative
0
agree
0
like
0
Doh!
0
No reactions
No reactions
No reactions
No reactions
No reactions

Offline Oz

  • Top Post Contributor
  • *
  • Posts: 3587
  • Member since: 2002
  • I own: a Motor Home
  • Year: 1974
  • Make: Winnebago
  • Model: D24 Indian
  • Chassis: Dodge
  • Engine: 440-3
Re: 1975 Winnebago 17.5" wheel covers / Hubcaps
« Reply #1 on: November 20, 2020, 01:09 AM »
Just finding the brackets might be impossible.   But here's someone selling the hubcap set.

https://www.facebook.com/groups/652725795357022/permalink/719966271966307/?sale_post_id=719966271966307

And possibly eBay.
funny
0
informative
0
agree
0
like
0
Doh!
0
No reactions
No reactions
No reactions
No reactions
No reactions

Offline shrike

  • New Poster
  • **
  • Posts: 8
  • Member since: 2020
  • I own: a Motor Home
  • Year: 1975
  • Make: Winnebago
  • Model: Brave, D19
  • Chassis: Dodge M300
  • Engine: 318
Re: 1975 Winnebago 17.5" wheel covers / Hubcaps
« Reply #2 on: November 20, 2020, 09:53 AM »
Thank you OZ, Was not familiar with that group.  If they were 17.5's Id be all over that.  Think Ill hold out a little and I may find them.  17.5's or 18" diameter is a tough set to find. been checking Ebay for some time.
funny
0
informative
0
agree
0
like
1
Doh!
0
No reactions
No reactions
No reactions
Members reacted like:
Oz,
No reactions

Offline RANGERRICK

  • Post Contributor
  • *
  • Posts: 107
  • Member since: 2015
  • I own: a travel trailer
  • Year: 1996
  • Make: Jayco
  • Model: 31BHS
Re: 1975 Winnebago 17.5" wheel covers / Hubcaps
« Reply #3 on: November 24, 2020, 07:58 PM »
I think i may have the brackets and maybe one knob.I will look tomorrow.
funny
0
informative
0
agree
0
like
1
Doh!
0
No reactions
No reactions
No reactions
Members reacted like:
Oz,
No reactions

Offline shrike

  • New Poster
  • **
  • Posts: 8
  • Member since: 2020
  • I own: a Motor Home
  • Year: 1975
  • Make: Winnebago
  • Model: Brave, D19
  • Chassis: Dodge M300
  • Engine: 318
Re: 1975 Winnebago 17.5" wheel covers / Hubcaps
« Reply #4 on: November 30, 2020, 11:31 AM »
Hey RangerRick, Did you ever find anything?   I also found out two of my hubcaps are 19" not 18",  So now I'm looking for two more 18" hubcaps.
funny
0
informative
0
agree
0
like
0
Doh!
0
No reactions
No reactions
No reactions
No reactions
No reactions

Offline RANGERRICK

  • Post Contributor
  • *
  • Posts: 107
  • Member since: 2015
  • I own: a travel trailer
  • Year: 1996
  • Make: Jayco
  • Model: 31BHS
Re: 1975 Winnebago 17.5" wheel covers / Hubcaps
« Reply #5 on: December 03, 2020, 07:33 PM »
Yes i do have so hardware.I PM you.
funny
0
informative
0
agree
0
like
1
Doh!
0
No reactions
No reactions
No reactions
Members reacted like:
Oz,
No reactions

Offline RANGERRICK

  • Post Contributor
  • *
  • Posts: 107
  • Member since: 2015
  • I own: a travel trailer
  • Year: 1996
  • Make: Jayco
  • Model: 31BHS
Re: 1975 Winnebago 17.5" wheel covers / Hubcaps
« Reply #6 on: January 06, 2021, 07:43 PM »
I have hub caps and hardware.Waiting for measurement of your hub cap.
funny
0
informative
0
agree
0
like
0
Doh!
0
No reactions
No reactions
No reactions
No reactions
No reactions

Offline shrike

  • New Poster
  • **
  • Posts: 8
  • Member since: 2020
  • I own: a Motor Home
  • Year: 1975
  • Make: Winnebago
  • Model: Brave, D19
  • Chassis: Dodge M300
  • Engine: 318
Re: 1975 Winnebago 17.5" wheel covers / Hubcaps
« Reply #7 on: January 11, 2021, 03:36 PM »
Hey rangerrick sorry for the delay in response, life is getting in the way.   My hubcaps measure 18" in diameter,  They fit inside the 17.5" rim exactly. You can use my email: Restorationranch@Bellsouth.net thanks, Steve.
funny
0
informative
0
agree
0
like
0
Doh!
0
No reactions
No reactions
No reactions
No reactions
No reactions