1975 Winnebago 17.5" wheel covers / Hubcaps

Started by shrike, November 19, 2020, 01:09 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

shrike

Hello,  I'm looking for brackets and center nuts to use the original hubcaps on my 1975 Winne Brave with 17.5" wheels.  I have 2 of what I believe are the correct brackets and center nuts for the rear but I am missing the brackets and nuts for the front.  I'm sure the nuts are the same but unsure of the bracketry.  Anyone out there with info or the brackets themselves, I would appreciate any help.  Attached is a photo of the hubcaps in question.

Oz

Just finding the brackets might be impossible.   But here's someone selling the hubcap set.

https://www.facebook.com/groups/652725795357022/permalink/719966271966307/?sale_post_id=719966271966307

And possibly eBay.
1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca

shrike

Thank you OZ, Was not familiar with that group.  If they were 17.5's Id be all over that.  Think Ill hold out a little and I may find them.  17.5's or 18" diameter is a tough set to find. been checking Ebay for some time.

RANGERRICK

I think i may have the brackets and maybe one knob.I will look tomorrow.

shrike

Hey RangerRick, Did you ever find anything?   I also found out two of my hubcaps are 19" not 18",  So now I'm looking for two more 18" hubcaps.

RANGERRICK


RANGERRICK

I have hub caps and hardware.Waiting for measurement of your hub cap.

shrike

Hey rangerrick sorry for the delay in response, life is getting in the way.   My hubcaps measure 18" in diameter,  They fit inside the 17.5" rim exactly. You can use my email: Restorationranch@Bellsouth.net thanks, Steve.