Classic Winnebagos & Vintage RVs
Topic Boards => Coach => Topic started by: johnnytugs1 on July 22, 2012, 08:47 PM
Good Day my fellow CWVRVers, I am about to become the proud owner of a 1969 Yankee Clipper Travel Trailer. I'm going to be picking it up between the 31st of July and the 5th of August. I would like to change out the bearings before I get underway with it on the 3 hour-ish trip to it's new home. Any idea how I would go about finding what wheel bearings I will need? Any info will be appreciated.
Thanks,
JT
Attached are some pics that are equivalent to it.
(https://www.classicwinnebagos.com/forum/proxy.php?request=http%3A%2F%2Fi115.photobucket.com%2Falbums%2Fn314%2FLiv42dayOK%2FCW%2FAttachments%2Fjohnnytugs1%2Fbeforeback.jpg&hash=14e13f94fc4194819707140703497e5ea288e6f1)
(https://www.classicwinnebagos.com/forum/proxy.php?request=http%3A%2F%2Fi115.photobucket.com%2Falbums%2Fn314%2FLiv42dayOK%2FCW%2FAttachments%2Fjohnnytugs1%2Fbeforefront.jpg&hash=bc6d4a2bf482eca8bc611a8a2e9c38d15a8095d2)
Looking good Johnny!! Y!
If they're too worn to re-pack or are blown, I would take a guess at pulling one and taking it to a commercial trailer center to match it up to something compatible.
Thank you Mark!
Thank you Joan !
Rather surprised it doesn't have a roof a/C
No worries I have a spare in the garage :) It's a good day, I received a notification email. Life is good even though mother nature tried to ruin my day!
JT