Classic Winnebagos & Vintage RVs
Topic Boards => Chevy - GMC Chassis => Topic started by: tomdjones on May 17, 2021, 12:47 PM
1988 Winnebago Elandan 37. Wipers were working. Then they stopped. When key is on power is getting to wiper motor. Wiper fluid motor works when you push on switch. There are 3 purple wires going to the wiper motor. One of them has constant power once the key is turned in the on position. If I remove that wire and plug it into either one of the other two connectors on the wiper motor the wipers come on and work. I'm guessing by doing this I'm bypassing the relay/module. Does this thing have a relay? Module? or both? And where is it located? Thank you in advance.
Hm?
Any1?