Classic Winnebagos & Vintage RVs
Topic Boards => Coach => Topic started by: dave shep on August 28, 2019, 05:51 PM
all,
I've read all the forum items on window seals and have on order what I believe the available seals and U channel for my 1973 D18. (2309-01, 2324-01, 24096-01)
Some advice as to the following would be helpful:
1. Is it possible to replace the seals and U channel without removing the entire window frame?
2. What kind of problems may I face?
3. Any hints as to how to start.. Do I need to remove the inner ring?
4. The unavailable stationary rear window moldings 2283-01, I am hoping the front 24096-01 will do the job...
5. I have no mullions... I assume they were metal and fuzzy stuff. Any recommendations? Velcro tape fuzzy stuck on window? etc..
thanks much..
taking a window out really isn't a big deal. you may want one size over the stock fastener (screw) to be able to embed the inner ring back into the wall material.