Classic Winnebagos & Vintage RVs
Topic Boards => Dodge - Chrysler Chassis => Topic started by: Whalerho on August 12, 2019, 05:18 PM
I recently bought a 1972 Winnebago Chieftain D22C. All is well with the RV but I now have a chance to buy some disk brakes from an M-400/500 using the same 5 bolt pattern lugs. The front axle was cut on each side just inside the king pins preserving the spindles, hubs, rotors, and calipers. Anyone know if these would be candidates for my motorhome? Thanks
Surf around on Dave's place for your answer. Good Luck http://dave78chieftain.com/index.html