Classic Winnebagos & Vintage RVs

Topic Boards => Dodge - Chrysler Chassis => Topic started by: Shaneyk88 on June 28, 2019, 01:28 PM

Title: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Shaneyk88 on June 28, 2019, 01:28 PM
I purchased the Brave last summer and hadn't had much time to work on it until now. When the throttle broke and I started looking at fixing it, things just weren't adding up. I started to dig into the project. I crawled under it and found this
(See Pic)!  :)clap :)clap :)clap
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: LJ-TJ on June 28, 2019, 05:40 PM
 :)ThmbUp  Yep! That's going to be a big help now you know you own a 360 D:oH!
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Rickf1985 on June 28, 2019, 05:44 PM
A 4006630 is a 440 and a 4006530 is a 400 but there is no record of a 4006830.  I am not so sure the 360 suffix means it is a 360.


https://m.roadkillcustoms.com/mopar-engine-block-numbers/ (https://m.roadkillcustoms.com/mopar-engine-block-numbers/)
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Rickf1985 on June 28, 2019, 06:02 PM
A little more research tells me it is a 360 motorhome engine from around 73-75. The same engine was used in the Cordoba and similar cars with a two barrel carb. I had one of those cars, not bad but not exactly a powerhouse either.  It is probably the original engine in there unless you have paperwork stating otherwise.
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Shaneyk88 on June 28, 2019, 06:09 PM
All good info. Thanks. This 360 is running a 4bbl and has a date code stamped on it of 3-3-78.
I didnââ,¬â,,¢t know they even offered the 360 in the 73 18ââ,¬â,,¢ Brave. I thought only 318 or 440. Maybe 413?
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Rickf1985 on June 28, 2019, 06:26 PM
I can't help you there, I just researched the Dodge engine and I remember working on them in my shop. Dave is the Dodge Motor home goto guy on here.
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: BamBam on June 28, 2019, 06:29 PM
Quote from: Shaneyk88 on June 28, 2019, 06:09 PM
All good info. Thanks. This 360 is running a 4bbl and has a date code stamped on it of 3-3-78.



Now that you know that remember it for when you need parts that it's for a 78 360, but everything else is 73. Good Luck
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Shaneyk88 on June 28, 2019, 08:38 PM
 :)ThmbUp
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Xbird on June 29, 2019, 08:05 AM
LA 360 is a good engine, have one in my '89 dump truck, you can go from carb to TBI pretty easily by pulling the TBI setup off of mid to late 80s trucks and vans that have the 360.
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Rickf1985 on June 29, 2019, 11:43 AM
The TBI 360's I worked on were total dogs! We had several snowplows with them and they could not plow even medium wet snow where the older and newer trucks had no issues at all. Now the MPI 360 is another animal altogether, they are very powerful engines. But like any Mopar engine they are thirsty.
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: DaveVA78Chieftain on June 29, 2019, 04:56 PM
Starting point: Find the Dodge VIN number plate and decode it (http://www.classicwinnebagos.com/Pages_HTML/DodgeVINdecoder.html#1972).
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Shaneyk88 on June 30, 2019, 03:03 PM
Well I crawled under it again and could make out most of the # stamped in frame, which is completely different than the VIN # by drivers seat. According to the G in the frame # looks like it was originally a 318-3. Thanks for the link!
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: LJ-TJ on June 30, 2019, 03:57 PM
 :) Keep crawling.....we'll get her history figured out.
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: Scotty76 on October 05, 2019, 08:36 PM
well that is odd you have a 73 and mine is a 76 brave 21
with the same block #4006830-360 which i could not find a match
the production date on my block is 30-10-75
the stamp on the front of the head says 360 i was told the engine had been changed in mine  how they were able to find a year and block vin that matches is lucky
but braves never came with a 360  lol 
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: legomybago on October 07, 2019, 10:37 AM
The 360 is a direct bolt in upgrade replacement for the 318. That is why you guys have them. That is a route I would maybe go if I had a tired 318, rather then trying to swap a 440.
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: strange bleu on October 13, 2019, 09:21 AM
(https://live.staticflickr.com/65535/48890791466_3f6b105efb.jpg) (https://flic.kr/p/2huj5Ys)


Hey how's it going! I'm new here. Just trying to sift through all the valuable information.
I use the decoding Key you provided!! Can anyone confirm I decoded correctly
The 5th letter K indicates I have a 360-3 2bbl




thanks in advance and I look forward to being apart of this community.
Title: Re: I guess my 318 isn't a 318 after all -it's a 360 block!
Post by: DaveVA78Chieftain on October 13, 2019, 05:24 PM
Yep, you got it correct,  79 M400 with a 360-2bbl.