Classic Winnebagos & Vintage RVs
Topic Boards => Chevy - GMC Chassis => Topic started by: kattkisson on September 20, 2015, 06:59 PM
I have a p-30 chassis in a Warrior 22 winnebago. Does anybody know where the heater fan resistor is and how to access it? I've looked everywhere that I can see in the ductwork where they normally are are don't see a thing. Can't even see the fan motor itself. How to get to it??
I must have had a trash fire at the resistor when I cut the rig off this afternoon . Very smelly but I want to look things over. Remarkably everything still works.
1993 Warrior 22 Wiring Diagrams (http://www.winnebagoind.com/diagram/1993/93_d22rb_wiring.htm)
Dash heating circuit is on 1st page of Automotive Wiring Diagram. Looks like the resistor board and fan are in the aftermarket heater box which is normally on the passenger side floorboard. Follow heater hoses to the box location. Parts says there is a cover panel over the box.
1993 Warrior 22 Parts book (http://www.winnebagoind.com/service/wincd/1993/93wcd22rb.pdf)
Hi, I am new. I followed your links for parts and diagrams for the 1993 Winnebago Warrior 22 and they no longer exist. Do you know where I might find these? Thank you
New link to parts manual
https://catalog3d.winnebagoind.com/menu/Parts.htm
You can call Winnebago and they will send you wiring diagrams via email.