Print Page - Need a 318-3 exhaust manifold

Title: Need a 318-3 exhaust manifold
Post by: Chandler Lewis on January 24, 2015, 08:23 AM

Hey, maybe one of y'all can give me hand here.

I am desperately trying to find a driver's-side exhaust manifold for a 318-3 (no heat riser). It's for my '73 Brave D-20. Any help you can provide is much appreciated.

These aren't so easy to find. Found a right-side one in a local scrap yard, but I don't think it'll fit on the other side. Will check it out once the snow abates.

I did contact 1A Auto (http://www.1aauto.com/), and am waiting to see if they can locate one.

Thanks!

--Chandler

Title: Re: Need a 318-3 exhaust manifold
Post by: DaveVA78Chieftain on January 24, 2015, 12:42 PM

http://www.classicwinnebagos.com/forum/index.php?topic=647.0 (http://www.classicwinnebagos.com/forum/index.php?topic=647.0)

Title: Re: Need a 318-3 exhaust manifold
Post by: Chandler Lewis on January 24, 2015, 04:27 PM

Thanks Dave -- lots of good info in that thread. One thing I'm trying to figure out is if there's really a difference between passenger- and driver's-side manifolds that aren't drilled for the heat riser. Denison indicates there really isn't.

Anyone know this for sure?

Thanks!

Classic Winnebagos & Vintage RVs

Topic Boards => Dodge - Chrysler Chassis => Topic started by: Chandler Lewis on January 24, 2015, 08:23 AM