Print Page - Replace '75 M300 sway bar bushing?

Title: Replace '75 M300 sway bar bushing?
Post by: povertycoach on August 20, 2014, 07:23 AM

School is in session, and I am in the front row...

Has anyone replaced their frame/link bushings on a straight axle MH. I see a part number, but they do not look like they are serviceable...

Title: Re: Replace '75 M300 sway bar bushing?
Post by: Bennett77 on August 23, 2014, 08:41 AM

Done this with my mustang and ranger. Measure the diameter and check with your local auto supply. Polyurthane bushings would be the way to go.

Title: Re: Replace '75 M300 sway bar bushing?
Post by: povertycoach on August 23, 2014, 11:45 AM

Those are easy. I work at NAPA, and for the 1-1/2" diameter there is nothing available...but I think I have devised a fix. More to follow.

Title: Re: Replace '75 M300 sway bar bushing?
Post by: Bennett77 on August 23, 2014, 12:07 PM

I shop Auto Zone and Napa, if one doesn't have the other might. plus there are about four other in the area, the parts are out there.

Title: Re: Replace '75 M300 sway bar bushing?
Post by: povertycoach on August 23, 2014, 12:25 PM

For the tough parts, Auto Zone sends customers to us.. I send customers to Auto Zone for their amazing air freshener and chrome hub-cap
selection = )

Classic Winnebagos & Vintage RVs

Topic Boards => Dodge - Chrysler Chassis => Topic started by: povertycoach on August 20, 2014, 07:23 AM