02 - Eternabond Tape

Previous Image | Next Image
Description: This stuff is the best thing to ever happen to vintage RV roofs!  For this repair, we'll be using 2 kinds:

Thin tape with aluminum layer (shown) and
Thick, regular for under moldings, vents, etc.  The tape has a thin, clear layer over the sticky side which needs to be removed before application.

The regular tape is thick and a little difficult to cut because it sticks very well.  

My rig is 24' long so I got two 2" x 50' rolls of the aluminum backed tape which is sold in 2" or 4" widths.  You don't need the 4" stuff, it's overkill and it also costs more for only a 35' roll. There was plenty left to go over all the seams & edge moldings and around all the roof vents and fixtures.  I got one 50' regular tape for under the molding as well.

Use the MessageSsearch or the Resource Links for Eternabond tape suppliers..

Picture Stats:
Views: 6835
Filesize: 41.01kB
Height: 338 Width: 450
Posted by: Oz at July 13, 2009, 05:22 PM

Image Linking Codes
BB Code
Direct Link
Show Html Link Code

Comments (0)



Powered by: SMF Gallery