Search



Monitor Panels on Alternator

Monitor Panels on Alternator
Previous Image | Next Image
Description:
Picture Stats:
Views: 4251
Filesize: 25.78kB
Height: 500 Width: 375
Posted by: PwrWgnWalt at June 04, 2013, 04:13 PM

Image Linking Codes
BB Code
Direct Link
Show Html Link Code

Comments (1)

PwrWgnWalt
Posts:204
June 04, 2013, 04:29 PM
This shows all the power & monitoring equipment.
At top left is the Intellitec BD-2 Battery Disconnect; it allows for isolation of either battery bank (Coach or Chassis). The red LEDs indicate they are ON (in use).

At upper right is the Trimetric 2025-RV, shown here with the engine running: the alternator is charging Battery 1 (Coach battery bank) at 14.4 volts.

In the lower part is the factory monitor panel - with a replacement LP (propane) gauge at lower right (VDO 301-303D, 0-90 ohm).  I installed the green LED in the panel to indicate when the Blue Seas SI-ACR-7610 has 'Connected" both battery banks together (ACR stands for "Automatic Connecting Relay" - it senses when there is a charge being applied to either battery bank, and if it is over a certain threshold for a certain period, it will connect the battery banks so both get charged. This works for any charging source applied to either battery bank.)


Powered by: SMF Gallery