Passenger side view of Ceramic plug boots & Hot Air tube

Previous Image | Next Image
Description: The only wire that is a constant problem is #8 as I burned it BEFORE I installed the heat boot. No longer a problem. The wire burned after two years but the ceramic boot is re usable. The aluminum tubing is for running the cold vapor from the HYCO through a preheat chamber to further expand the vapor to roughly 280 degrees at the carb. Not being used at this time but past testing proved good.
Picture Stats:
Views: 3365
Filesize: 18.94kB
Height: 320 Width: 500
Posted by: GONMAD at July 12, 2013, 05:57 PM

Image Linking Codes
BB Code
Direct Link
Show Html Link Code

Comments (0)



Powered by: SMF Gallery