Classic Winnebagos & Vintage RVs
Topic Boards => Coach => Topic started by: Adventure on September 13, 2022, 03:51 PM
Is it normal for the positive wire to the Charge Controller to be hot to the touch? I have 3 100 watt panels wired to a single 12 volt deep cycle battery, if that helps
What gauge is the wire. You may need larger. You should be using 10 or 8 ga. Prefer 8.
No, if both negative and positive are hot - would be a lot of current - if only one of them is hot - bad contact, or bad cable.
Retighten all the screws.
Not sure I don't have a gauge measured can I use a measurement caliper instead?
I think you nailed it l, the screw connector is messed up on the controller I think I need to replace the controller