Started by RockwoodMike, September 25, 2019, 11:43 PM
0 Members and 18 Guests are viewing this topic.
Quote from: RockwoodMike on September 24, 2023, 03:14 PMAnd Pic 4 shows the hole I drilled waiting for a 5/8 Grade 8 bolt for it
Quote from: eXodus on October 24, 2023, 05:05 AMI need to learn welding at some point.
Quote from: RockwoodMike on October 24, 2023, 10:57 AMQuote from: eXodus on October 24, 2023, 05:05 AMI need to learn welding at some point. You can start cheap with a flux core wire setup. Where the shielding gas is created with the flux that is in the middle of the wire..As you weld, it releases the flux making the weld correctly.Welding tips and tricks on YouTube and a bunch of others channels will give you the basics..What I want to really dive into is TIG welding..!!
Quote from: eXodus on October 27, 2023, 06:04 AMgot the chance to work about 2 minutes with TIG welder - that was a neat experience
Quote from: Mlw on October 29, 2023, 02:03 PMI'm really admiring your work my friend. Your skills are pretty impressive.
Quote from: RockwoodMike on October 29, 2023, 08:10 PMIt just seems like I will never get to the end of this!!
QuoteThere is a relay that clicks shut when on..and you get power to charge your battery and work all the 12volt stuff..When shore power is off, the relay clicks off and direct power from the battery to run everything..
Quote from: Eyez Open on October 30, 2023, 10:35 AMYour gas tank a light color comes to mind
Quote from: Mlw on October 30, 2023, 04:31 AMTrust me, I know the feeling. And seeing you going at it doesn't really ease my mind
Quote from: Mlw on October 29, 2023, 02:03 PMCharger/batteries - 13 volts all the time
Quote from: RockwoodMike on October 27, 2023, 09:17 PMPic 1..Master cylinder and Booster installed..Needs new brake lines now..After the engine is out..Pic 2..New drivers side floor board in..Need to fill it up with 1.5 inch foam insulation.Pic 3..Access opening to the master cylinder..Need to make the cover.
Quote from: eXodus on November 01, 2023, 06:06 AMNice work, with all the heavy metal you are putting in - are you going to upgrade to Hydroboost?