Drag link to much wear

[roma]

My drag link has to much wear so it didn t pass the yearly control.
If I look up the part number  I come up with the following Dodge part number.  3780545.


But if I type that number nothing comes up at internet.
Who can help me out


Greetings Roma from Holland

[roma]

I found it on rockauto , but when I went through internet where I found a pdf site from Moog.
Both the possebilitys in the parts book  the 3780545 and the 4026505 where in with foto and actuell length.
To my surprise I had the 4026505 instead of the 3780545 it should be according to the partslist.


Every time I need parts it turned out to bevery difficult with a M375 (M400) 1972/73 chassis.
But sofar with the help of this forum (old posts) and Dave and friends I always managed to get the right parts


Gr Roma

[BrandonMc]

I ordered a Moog adjustable draglink for another chassis, because the standard part number was a solid link, and I need to make sure the steering wheel can be aligned properly. I hope this helps.

[roma]

The parts arrived today at my home in the netherlands (took less then a week).
And luckely it turned out to be the right one.
So the winnie can be fixed again.