Front spring replacement nightmare.

Started by Rickf1985, July 12, 2015, 07:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TripleJ

As Rick said, they probably didn't program the machine for the new spec.  They mount the sensors, make adjustments according to the numbers then go.  Simple alignments don't pay much and finger jamming a computer to change the color of the blocks doesn't pay at all.
'85 Holiday Rambler Presidential '28

Rickf1985

Can I see the rest of the sheet for the current alignment? What I am seeing is fine. I am thinking they just did not put in a specific vehicle into the machine.

etchamp

I will get the rest of it when I get home...you think the camber is ok?

Rickf1985

I do and to give you a reference point, look at the camber on the rear wheels. Close to what the fronts are reading and that is a solid axle, no adjustment there. N:( ;)