Classic Winnebagos & Vintage RVs
Topic Boards => Dodge - Chrysler Chassis => Topic started by: wreckless17 on August 15, 2014, 01:29 AM
I have problem I recently noticed corrosion in battery compartment so I took batteries out and cleaned them and the whole compartment then I noticed a couple of broken circuit breakers so I got new ones when I was swapping them out I disconnected the wires from the battery isolator and not sure which wire goes where everything works inside but I don't think the batteries are isolated like when I drive the rocker switch could be on single battery but it appears that both batteries are being charged thank u for any advice anyone might offer
Typical battery isolator setup
(https://www.classicwinnebagos.com/forum/proxy.php?request=http%3A%2F%2Fi286.photobucket.com%2Falbums%2Fll120%2FBaileyDave%2FRV%2520Electric%2FDual-Norm-MOM.gif&hash=3e71c51a37bac5f7ad774e487746fd3ba74badbe)
Dave