Started by RockwoodMike, September 25, 2019, 11:43 PM
0 Members and 16 Guests are viewing this topic.
Quote from: RockwoodMike on November 01, 2023, 09:31 PMI always thought that 2 pumps were needed..1 for each system..Anyway, I went with the vacuum booster setup as shown..It matches the same set up as my yellow Ryder moving van..And I use to load down that thing with all my tools and building materials when I was doing my general contractor work..
QuoteThe sidewall of my RV are all foam and welded aluminum channels. Very flimsy, everything moves...
Quote from: Mlw on November 05, 2023, 11:41 AMQuoteThe sidewall of my RV are all foam and welded aluminum channels. Very flimsy, everything moves...Yep, we are actually rolling the dice when we step in these things, but what fun it is (or so i seem to remember)Nothing wrong with living on the edge.
Quote from: Eyez Open on November 05, 2023, 01:03 PMAre you going to seal up that wood in any fashion?
Quote from: LJ-TJ on November 06, 2023, 10:16 AMI can't stop shaking my head in amazement
Quote from: RockwoodMike on November 05, 2023, 07:52 PMQuote from: Eyez Open on November 05, 2023, 01:03 PMAre you going to seal up that wood in any fashion?Are you talking about the inside roof rafters??If so, I didn't plan to.I was thinking that laying a good primer on the exterior plywood of the roof might be an idea..You see these videos of roofs that get torn out and half the wood is rotted because it leaked..Maybe a primer on the plywood might keep that from happening..But will the roll on glue used for a new roof stick to the primer??Pic 1..All day on this laying up the area where the generator lives..You must have plenty of clamps and those magnet corner things help a bunch too!Pic 2..Same thing, just from the opposite view
Quote from: LJ-TJ on November 11, 2023, 09:49 AMI just purchase a Powder Coating Gun from Harbor Freight.