Classic Winnebagos & Vintage RVs
Topic Boards => Dodge - Chrysler Chassis => Topic started by: 73braved18 on July 10, 2018, 10:07 PM
Hello, I searched the whole site here and am not 100% sure.
I found these on eBay
https://www.ebay.com/itm/Mopar-Chrysler-SB-318-340-360-Block-Hugger-Stainless-Steel-Exhaust-Header/291748170941?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 (https://www.ebay.com/itm/Mopar-Chrysler-SB-318-340-360-Block-Hugger-Stainless-Steel-Exhaust-Header/291748170941?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649)
Will they fit my Brave's 318?
I know there was some port size differences between car and truck blocks but would this header bolt on?
I have a big trip planned coming up and found both my manifolds cracked. They are very bad shape and not weldable.
I am pulling the 318 out this winter and putting in a Chevy LS motor in so I can't spend much. I would prefer to purchase manifolds but can not find any...well at least can't find the left side.
Thanks for any help guys!
Hi!
I can't tell you if they would fit or not. But when thinking about replacing the manifolds on my 440 with block huggers or such I recognised they would interfere with the original starter. In my case I need a mini-starter before going headers.
Good luck from germany,
ben
Thanks for the reply. It looks like my starter may cause clearance problems too.
What your looking at are shorty headers. They dump about where the stock manifold does. I'm putting a pair on a 440 and don't for see a problem.
@yellowrecve
Could you please let me know what exactly you bought?
@73braved18
sorry for highjacking your thread ;)
Greets, ben
I don't know where my paper work is. Paid about $150. Their stainless steel shorty headers. Lots on E-Bay. Bought them in March, have not had time to install. My cast iron manifolds are still good.
Les