Text only | Text with Images

Classic Winnebagos & Vintage RVs

Topic Boards => Dodge - Chrysler Chassis => Topic started by: gmiller442 on October 05, 2009, 04:30 PM

Title: Socket Size for 77 Chieftain front hub removal?
Post by: gmiller442 on October 05, 2009, 04:30 PM
Hi All!

I have a 77 Chieftain with the M400 chassis and I am I need of removing the front hubs for service. What size socket do i need to remove cap over spindle nuts and bearings?  It is huge...around 2 1/4 to 2 1/2 inches. Also, does the cap thread on or does it just push on?

Thanks,

gmiller442
Title: Re: Socket Size for 77 Chieftain front hub removal?
Post by: 77Brave on October 05, 2009, 09:07 PM
As far as the bearing dust cap goes, once you get the tire off you should be able to use a screw driver to pry it off. I have a M-300 but this is what worked for me. The two bolts for the brake caliper are 15/16". To remove the spindle, it requires a 1 1/2" socket. I couldn't find a spindle wrench of that size but the 'Great Necks' socket I bought worked perfectly. Hope that helps some what...

Brad
Text only | Text with Images