Transmission shift cable broke

Started by The_Handier_Man1, November 25, 2008, 03:51 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

xeriod

Sent: 8/5/2002 10:59 AM

Have 73 19' Brave with 360.
Shift cable at transmission connection is broken.
Can still drive if transmission lever is moved manually.
Dealer says that cable is only around in bone yards.

Any suggestions?

chip

Sent: 8/7/2002 9:17 PM

here's a couple of suggestions;1. monicatti @ 810-977-1700 lots of cancelled and nos parts.2.bouchillon @ 843-744-6559 or, www.bouchillonperformance.com. they make the 727 kickdown cable kit and might have a suggestion.3. i think a morse control cable could be adapted to work but i haven'nt really researched the idea.

xeriod

Sent: 8/7/2002 11:27 PM

Chip,
Thanks for the tips.As a temporary fix, I have drilled a 3/16" hole near the top ofa 1/2" bolt and attached it to te end of the cable. The swivel was rusted tight and after freeing it, I wired it to the bolt. Works fine for now

denisondc

Sent: 2/12/2004 7:40 PM

I bought a new tranny shifter cable from dartman67 @ aol. com. It cost $108, and I was delighted to get it. denison