318-3 gasket set source?

Started by polarman, May 09, 2013, 07:25 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

polarman

 So, I need to find a gasket set for my 73 Brave with the 318-3 engine. I can not seem to find gaskets for the 318-3 anywhere. They have been on order at NAPA, but still on factory back order. I was hoping that someone might have a manufacturer and part number that I could use to cross reference and find what I need.
It seems the old small block is getting coolant in the oil so I need to pull the intake and heads to find the cause of the problem. I'm assuming it's just a bad gasket either under the intake or one of the heads, but I will have the heads magnafluxed  and check them with a flat bar to make sure they are not cracked or warped. It needs valve seals worse than bad, so a whole top end gasket set would be ideal.
Delhi Lodge #439 Free and Accepted Masons

Stripe

Would this be what you're looking for???
http://www.summitracing.com/parts/fel-ks2114/media/images/make/dodge
Maybe that will help ya..

Fredric
Fredric,
Captain of the Ground Ship "Aluminum Goose"
28' Holiday Rambler Imperial 28

polarman

 I'm not sure. My concern is that the 318-3 has and enhanced cooling system compared to the regular 318. Is there cooling jackets that run trough the intake that would require a 318-3 specific gasket set?
Delhi Lodge #439 Free and Accepted Masons