Author Topic: Penetrating Oils  (Read 4405 times)

Offline LJ-TJ

  • 14 year member
  • *
  • Posts: 2504
  • Member since: 2003
  • I own: a Motor Home
  • Year: 1975
  • Make: Winnebago
  • Model: D21
  • Chassis: Dodge
  • Engine: 440-3
Penetrating Oils
« on: June 16, 2013, 07:44 AM »
BG In-Force

   An ion-activated penetrating oil which stops rust, and lubricates and frees rusted parts. It can also be used in assembly applications. When bonded to metal, it forms a protective coating and lubricating surface which is enhanced by other lubricants and corrosion inhibitors.

Part No. 4383
  Net Wt. 15.75 oz. (446 g)
  Volume 19.53 fl. oz. (578 mL)
  Net Wt. 3 oz. (85 g)
  Volume 3.69 fl. oz. (109 mL)

Just after many years of using this stuff on old rusty Winnebago parts, wanted to tell you guys to check this stuff out. It is one of the few that really does loosen old rusty parts. Here's a link to find out where to get it.
   
http://www.bgfindashop.com/locator/index.php

Offline SoakedKarma

  • *
  • Posts: 19
  • Year: 1989
  • Make: Elite Coach Corporation
  • Model: Elite 38
  • Chassis: John Deere 208"wb RV-1200
  • Engine: 460cid
Re: Penetrating Oils
« Reply #1 on: June 24, 2013, 06:41 PM »
A study published by Machinist's Workshop magazine in their April 2007 issue looked at different penetrating oils to see which one did the best job of removing a rusted bolt by measuring the pounds of torque required to loosen the bolt once treated.
 Penetrating oil ......... Average load
 None ....................... 516 pounds
 WD-40 .................... 238 pounds
 PB Blaster ............... 214 pounds
 Liquid Wrench ......... 127 pounds
 Kano Kroil .............. 106 pounds
 ATF-Acetone mix.......53 pounds

But than y'all could try Mouse Milk Penetrating Oil..

Offline pvoth

  • Full Time Adventurer!
  • *
  • Posts: 411
  • Year: 1990
  • Make: Winnebago
  • Model: Chieftain 31 RQ
  • Chassis: Chevy
  • Engine: 454 Carbureted
Re: Penetrating Oils
« Reply #2 on: June 24, 2013, 07:55 PM »
I always liked Kroil the best....but I m gonna have to try AFT and Acetone....any idea on the mix???

Numbers are cool!
We call our coach "Charlie Brown"

Offline Madathlon

  • *
  • Posts: 185
  • Life on the Road starts with a flat tire
  • Year: 1984
  • Make: Winnebago
  • Model: Chieftain 26RB
  • Chassis: Chevy
  • Engine: 454
Re: Penetrating Oils
« Reply #3 on: June 24, 2013, 08:15 PM »
I have always sworn by marvels mystery oil myself.
Madathlon
   CWO4 Motor Pool Chief (retired)
   Onan Master Installer/Service Tech
   Mercury Marine Golden Wrench
   OMC Master Marine Tech
   ASE Master Tech

Offline Zombago

  • *
  • Posts: 6
  • I own: a Motor Home
  • Year: 1973
  • Make: Brave
  • Model: D20
  • Chassis: Dodge
  • Engine: 318
Re: Penetrating Oils
« Reply #4 on: May 29, 2015, 12:25 PM »
I recently picked up a two pack of WD40 with their penetrant at HomeDepot. So far anything I have used the penetrant on has litterally freed right up right away with my hands. Although the only thing it didn't work on was my original pressure gauge manual fill spout for the water system, which after a little careful inspection appears to be JB welded on.  ;) Seems to be great stuff, and easy to find, but the cap that converts from big area to focus area with the long hose isn't designed very well.

 

FULL Membership!

Want to start enjoyingall the benefitsFull Membership has to offer?

Become a Full

Want to enjoy your

Full Membership

without ever having

to renew?

Become a: