Author Topic: New RVer 1990; Tiffin Open Road (p30) project.  (Read 136 times)

Offline Reego

  • *
  • Posts: 7
  • Member since: 2020
  • I own: a Motor Home
  • Year: 1990
  • Make: Tiffin
  • Model: Open Road
  • Chassis: Chevy
  • Engine: 454
New RVer 1990; Tiffin Open Road (p30) project.
« on: June 29, 2020, 04:30 PM »
So I picked up my first motorhome after looking around on and off for a while. I found this one a few miles from my house and pulled the trigger on it. I knew it was going to be a hell of a project cause it hadn’t ran in 10 years. The interior is in surprisingly good condition minus a small leak over the driver seat where the aluminum roof meets the fiberglass front face. I covered the entire roof with heavy gauge plastic to stop any further damage. After that I started looking around in here I decided to try to get the engine running, i followed Lefty’s post on how to get the engine ready to be started, and get her running from a gas can. I will keep you guys updated as i go thru the check list of things to do and add pictures along the way!

Offline Oz

  • *
  • Posts: 3308
  • "So let it be written; so let it be done!"
  • Member since: 2002
  • I own: a Motor Home
Re: New RVer 1990; Tiffin Open Road (p30) project.
« Reply #1 on: June 29, 2020, 11:54 PM »
Awesome!
Previously enjoyed our '74 - D24 Indian & '74 - D24 Indian Custom

Offline Reego

  • *
  • Posts: 7
  • Member since: 2020
  • I own: a Motor Home
  • Year: 1990
  • Make: Tiffin
  • Model: Open Road
  • Chassis: Chevy
  • Engine: 454
Re: New RVer 1990; Tiffin Open Road (p30) project.
« Reply #2 on: July 06, 2020, 10:02 PM »
Removed the fuel tank to send it out to get cleaned. Also have to find a replacement fuel sending unit/float. Or I’m going to rebuild this one.