Author Topic: 92 Sunflyer - Suburban NT34 BW removal  (Read 639 times)

Offline skloon

  • *
  • Posts: 101
  • Member since: 2017
  • I own: a Motor Home
  • Year: 1992
  • Make: ITASCA
  • Model: SUNFLYER
  • Chassis: GMC
  • Engine: 454
92 Sunflyer - Suburban NT34 BW removal
« on: October 15, 2019, 01:09 PM »
My furnace did not work this weekend and it was -9 so I think I have to look at it- I only see two screws holding it in from the outside- on the inside I pulled the intake air panel and only see a 3x6 or so hole in the floor but no screws- but there is carpet under there so I wonder if I cant see it- any hints for pulling it out ?

Offline Oz

  • *
  • Posts: 3249
  • "So let it be written; so let it be done!"
  • Member since: 2002
  • I own: a Motor Home
Re: 92 Sunflyer - Suburban NT34 BW removal
« Reply #1 on: March 14, 2020, 06:56 AM »
Have you checked the Member area manuals for this model?
Previously enjoyed our '74 - D24 Indian & '74 - D24 Indian Custom

Offline Froggy1936

  • 15 year member
  • *
  • Posts: 1616
  • Member since: 2004
  • I own: a Motor Home
  • Year: 1977
  • Make: Winnebago
  • Model: Minnie Winnie
  • Chassis: Chevy G30
  • Engine: 5.7 1995
Re: 92 Sunflyer - Suburban NT34 BW removal
« Reply #2 on: March 14, 2020, 03:33 PM »
Also in the projects section there Are some pics Of when i replaced my furnace that might help Frank
The Journey is the REWARD !