the final poop on winnebago D18 window seals

Started by dave shep, August 28, 2019, 05:51 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dave shep


all,


I've read all the forum items on window seals and have on order what I believe the available seals and U channel for my 1973 D18.  (2309-01, 2324-01, 24096-01)


Some advice as to the following would be helpful:


1. Is it possible to replace the seals and U channel without removing the entire window frame?


2. What kind of problems may I face?


3. Any hints as to how to start..  Do I need to remove the inner ring? 


4.  The unavailable stationary rear window moldings 2283-01, I am hoping the front 24096-01 will do the job...


5.  I have no mullions...  I assume they were metal and fuzzy stuff.  Any recommendations?  Velcro tape fuzzy stuck on window? etc.. 


thanks much..




BrandonMc

taking a window out really isn't a big deal. you may want one size over the stock fastener (screw) to be able to embed the inner ring back into the wall material.