1972 dodge 375 chassis rear wheel brake cylinders

Started by outdoorsguy36, April 15, 2019, 10:23 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

outdoorsguy36

I'm trying to match up some rear wheel cylinders for my D24C winnebago. The ones on there work but leak really bad so I need a rebuild kit, refurbished or new cylinders. Anyone know where I can buy some or a company that will rebuild the ones I have?

ClydesdaleKevin

Back when I had a 72 with a 413 engine, I found all my brake parts at Alretta Truck Parts.  They are listed in the members area, but the link doesn't work.

This link in the members area does work though...they can rebuild your wheel cylinders.

http://precisionrebuilders.com/

Kev
Kev and Patti, the furry kids, our 1981 Ford F-100 Custom tow vehicle, and our 1995 Itasca Suncruiser Diesel Pusher.

ClydesdaleKevin

I found the link for Alretta Truck Parts.  They have everything you could possibly need for any hydrolic brake system.

http://alretta.com/

Kev
Kev and Patti, the furry kids, our 1981 Ford F-100 Custom tow vehicle, and our 1995 Itasca Suncruiser Diesel Pusher.

outdoorsguy36

I just spoke with the owner from http://alretta.com/ he said hes going out of business in a few months.

legomybago

Dang, this company has been a big help for Eyebrow owners....
Never get crap happy with a slap happy pappy

ClydesdaleKevin

Quote from: outdoorsguy36 on April 15, 2019, 01:24 PM
I just spoke with the owner from http://alretta.com/ he said hes going out of business in a few months.

Then he better order his wheel cylinders right away...lol!  I also suggest that if you have one of these old Dodge eyebrow Winnies and you think you might need a master cylinder some day...order one while you can.

Kev
Kev and Patti, the furry kids, our 1981 Ford F-100 Custom tow vehicle, and our 1995 Itasca Suncruiser Diesel Pusher.

SR66

I just replaced both of mine a few weeks ago. Ours is a 74 Brave.


I found them on Rock Auto. Can't image they are much different from what I needed.


Went there and looked around under 1972 D300 pickup and they have them. You may need to look under W300 or B300


Usually it takes some internet detective work to find the part numbers.


One of the wheel cylinders on ours was leaking and the other one looked ok but I replaced it anyway.


The Brave brakes like new now.


BTW have you ever torn into the rear hub before?

DivinylRecords

http://www.powerbrake-drivetrain.com/

this is where I got mine, they ask a lot costwise. but find the casting number off them and look here.