Converter Progressive Dynamics 699 Dave You Out There

Started by LJ-TJ, August 30, 2020, 06:56 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

LJ-TJ

Hey bud, just lost the 12 volt side of my progressive dynamics 699 converter. Any thoughts on were to start to track down the problem. On shore power Fridge works, Microwave works, TV works. Nothing 12 volts works. Thanks in advance. ??? :( Hm?

DaveVA78Chieftain



I do not have internal wiring diagrams for a PD699

Is the TRANS/OFF/BATTERY set to TRANS?
Is 12VDC available when you set the TRANS/OFF/BATTERY switch BATTERY?
Have you tried to reset the AC and DC push button circuit breakers?

Dave

PS: you may have to replace the converter: Upgrading TJ's 1975 D-21 Electrical System
[move][/move]


Oz

1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca

LJ-TJ

Hey Guys  :)ThmbUp Thanks a million for your responses. Yep! I'm thinking of a up grade. However after working on this thing since Thursday (suppose to have gone drag racing and camp out.) At 12:05 I found the problem. A bad ground. As you guys always say"Did you check for a good ground" D:oH! Plus after a little pull and push on wires and breakers it was a sticky breaker. Can't thank you's for your quick response. Wish more guys were fiddleing with the earlier rigs so I could kick in a bit. Thanks again.

Oz

Awesome!  Such a sigh of relief when it turns out to be that favorite gremiln... bad ground.
:D
1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca

DaveVA78Chieftain

Good to hear it all worked out well.  Happy camping - Dave
[move][/move]


Oz

As for the part in your topic title, "Dave You Out There"

Yes, Dave is definitely.... "out there"  W%  :D
1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca