Replace '75 M300 sway bar bushing?

Started by povertycoach, August 20, 2014, 07:23 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

povertycoach

School is in session, and I am in the front row...

Has anyone replaced their frame/link bushings on a straight axle MH.  I see a part number, but they do not look like they are serviceable...

Bennett77

Done this with my mustang and ranger. Measure the diameter and check with your local auto supply. Polyurthane bushings would be the way to go.
Chief Engineer-My Craft Allows Me To Build ANYTHING IN THE WORLD. I possess a skill set 98% of the population can not do.

povertycoach

Those are easy.  I work at NAPA, and for the 1-1/2" diameter there is nothing available...but I think I have devised a fix.  More to follow.

Bennett77

I shop Auto Zone and Napa, if one doesn't have the other might. plus there are about four other in the area, the parts are out there.
Chief Engineer-My Craft Allows Me To Build ANYTHING IN THE WORLD. I possess a skill set 98% of the population can not do.

povertycoach

For the tough parts, Auto Zone sends customers to us.. I send customers to Auto Zone for their amazing air freshener and chrome hub-cap
selection  = )