Classic Winnebagos & Vintage RVs

Topic Boards => Dodge - Chrysler Chassis => Topic started by: turbinebronze on February 02, 2020, 08:31 PM

Title: Dodge M-500 Front brake pad part numbers
Post by: turbinebronze on February 02, 2020, 08:31 PM
Hi Dave. I used your page for the front brake pad part numbers on my M-500. (Very handy! Thanks!) I did find 2 different size front pads for the same front axle. (Maybe I was looking at the page wrong??)  I took a pic of each and of all the part numbers I found for each. I thought you'd like the numbers to check and maybe use.
   Hope this helps,  Craig
Title: Re: Dodge M-500 Front brake pad part numbers
Post by: DaveVA78Chieftain on February 02, 2020, 10:32 PM
Brake pad style numbers (e.g. 7020-D87 & 7019-D269) are based on the FMSI numbering system.


7019-D269 was used on the smaller M300 rigs with the single piston caliper.
(http://dave78chieftain.com/BrakeData_files/FMSI%207019-D269.jpg)


7020-D87 was used on the larger M400, M500, and M600 rigs with the dual piston caliper.
(http://dave78chieftain.com/BrakeData_files/FMSI%207020-D87.jpg)


Each brake pad mfg produces different quality pads (standard, premium, etc.) and the other letter codes used (MX, PD, MGD, PF, UP, TS, etc.) in a part number represent those different pad qualities.