Classic Winnebagos & Vintage RVs
Topic Boards => Dodge - Chrysler Chassis => Topic started by: srosa707 on May 01, 2019, 10:57 PM
Hey guys. I pulled my carb for a rebuild on my 318 this week and got it all back together. The instructions are somewhat limited and calls for the vehicles user manual for carb specs. Hoping to get out this weekend for a quick trip and don't have the engine manual. Does anyone have the spec for a '73 318 2-barrel carb? Specifically, curb idle screw adjustment and ignition timing position, if possible. Thanks in advance.
Also, the dwell setting if its in the manual.
You might want to buy the Dodge Service manual (http://www.classicwinnebagos.com/forum/index.php?action=store;cat=42) to assist your quest. Answers most all chassis related questions including the ones you are asking.
Dave, thanks for the advice! I just realized I have that exact manual! Ill check there