Everythi­ng hooked up… The Enhancer control… The business end of… The Micro adjuster H… EL CHEAPO air intake…
The business end of the "CARB ENHANCER" it works on any carb
Here is how to install the unit on an Edelbrock type carb. Copper tubing is slightly crimped to fit tightly into the bottom of the vent well leaving a 1/4"gap , do not block the vent! I Teed it off  (Eagle wants me to use two separate enhancers) Usually each bowl should have it's own, maybe later. the tube goes to a valve connected to a vacuum port.

Poster information

Item Info


  • Charter Member
  • Total Items: 106
  • Total Comments: 5
PostedJuly 17, 2013, 06:18 PM
Width × Height500 × 420
Filesize64 KB
Last EditedJuly 17, 2013, 06:50 PM By Oz
BBC embed code
HTML embed code
Direct link
Comments No comments
Aeva Media 1.4c © noisen / smf-media
SimplePortal 2.3.7 © 2008-2020, SimplePortal