Image
« »
EL CHEAPO air intake… External Sheilded oi… Passenger side view… Triple boosters in a… MY "BEST BUDDY" Budd…
Passenger side view of Ceramic plug boots & Hot Air tube
The only wire that is a constant problem is #8 as I burned it BEFORE I installed the heat boot. No longer a problem. The wire burned after two years but the ceramic boot is re usable. The aluminum tubing is for running the cold vapor from the HYCO through a preheat chamber to further expand the vapor to roughly 280 degrees at the carb. Not being used at this time but past testing proved good.

Poster information

GONMAD

  • Charter Member
  • Total Items: 106
  • Total Comments: 5
Item Info
PostedJuly 12, 2013, 04:57 PM
Width x Height500x320
Filesize18 KB
FilenameIMGP4204.jpg
Views2160
Downloads2
Rating
Last EditedApril 29, 2014, 11:54 AM By Oz
BBC embed code
HTML embed code
Direct link
SMF Media Gallery 2.0.5 © SMF-Media.com